FAQ About PVC Entrance Anti-Slip Floor Mats
What is the PVC entrance mat made from?
The UW-V506A entrance mat combines PVC foam with polyester mesh reinforcement. Raised foam ribs and open gaps create a textured, cushioned surface, with custom printed patterns available for branded collections.
What sizes and thickness are available?
Standard sizes are 45 × 65 cm and 65 × 150 cm, with custom dimensions available. The reference thickness is approximately 4.5 mm. Confirm finished thickness and edge construction against the selected sample.
How can buyers check whether the mat fits under a door?
Measure the smallest clearance between the door and floor throughout the opening path. Compare it with the finished mat thickness and allow additional clearance so the door does not catch or drag the mat. Verify fit with a sample.
Is this entrance mat waterproof and suitable for outdoor use?
The PVC material resists water, but the open structure allows water and fine dirt to reach the floor underneath. Indoor doorways are the primary application.
Can you manufacture custom printed entrance mats?
Yes. Uwin supports custom sizes, colors, printed patterns, branding and packaging. Provide artwork and sales-channel requirements so the print, construction and packaging can be reviewed before sample approval.
What is the MOQ for custom printed entrance mats?
Our standard production width ranges from 1.22 to 1.53 meters, with an MOQ of 450 linear meters per color and specification.
Can we approve a printed sample before production?
Request a sample using your artwork and preferred specifications. Review print colors, pattern placement, dimensions, thickness, floor grip and edge construction before approval. Sample charges and preparation time depend on the customization required.
What is the production lead time?
Bulk production typically takes 30 days after final sample approval. Shipping time is additional.
Textured PVC Foam Mat for Entrance Areas
This PVC entrance mat combines a soft foam structure with raised surface textures and open gaps. Polyester mesh reinforcement supports the foam construction, while customizable printed designs allow buyers to develop coordinated entrance mat collections.
Surface Structure and Everyday Comfort
The raised foam ribs create a textured contact surface underfoot. The flexible PVC foam adds cushioning and helps reduce direct contact with cold floors. Its water-resistant surface supports routine wiping and rinsing.
The open structure is not a continuous waterproof barrier. Water and fine dirt may reach the floor beneath the mat, so the underlying area should also be checked and cleaned.
Choosing a Size and Checking Door Clearance
Standard sizes are 45 × 65 cm and 65 × 150 cm, with custom dimensions available. Choose the size according to the doorway width, available floor space and direction of foot traffic.
Before ordering, measure the smallest gap between the door and the finished floor throughout the door’s opening path. Compare this with the actual thickness of the selected mat, including its edge finish, and allow extra clearance so the door opens freely without catching or dragging the mat. Confirm fit with a sample.
Indoor and Sheltered Entrance Applications
Indoor entrances and doorways are the primary intended applications. Place the mat flat on a clean, dry and level floor, and check its stability on the intended flooring before use.
For covered outdoor entrances, confirm the selected material and printed finish against the expected moisture, sunlight and temperature exposure. Use in fully exposed outdoor areas requires weathering validation.
Removing Mud, Sand and Everyday Dirt
- Lift the mat and gently shake off loose sand and dry dirt.
- Use a soft brush to loosen dirt caught between the foam ribs.
- Wipe or rinse the mat with water; use a mild detergent when needed.
- Clean the floor underneath and let both surfaces dry before replacing the mat.
- Avoid abrasive brushes, strong solvents and high-temperature cleaning.
OEM and Private-Label Customization
Uwin supports custom sizes, colors, printed patterns, branding and packaging.Confirm finished thickness, weight, underside structure, edge finish and required test documentation during sample approval.
Reviews
There are no reviews yet.